A2: |
Follow the following
operations to calibrate the shoulder
position.
1.Turn off the power
of the player, and connect the
player to the computer via the
USB cable. Place the player on
the stand supplied with the player
so that the "Rolly" logo
of the stand and the "SONY" logo
of the player should be in the
same direction.
2.Connect the player to
the computer.
3.Start Rolly Choreographer,
and select [Tools] - [Calibrate
Rolly].
4.A message "The positions
of the left and right shoulders
of Rolly will be adjusted. Confirm
the state of Rolly on the customer
support Web page and execute the
operation if Rolly needs to be
calibrated. OK?" appears.
Select "Yes."
5.A message "Confirm
details of the procedure on the
custom support Web site, and then
execute the operation." appears.
Suit the left and right arm joints
to the stand marker, and select "Execute."
FIGURE ----
6.The side lamps of the
player light up in green. The shoulders
move automatically, and adjust
the left and right shoulder positions.
7.After the calibration,
a message "Calibration has
finished." appears.
8.Select "Close".
* After inserting the rechargeable
battery, start the calibration.
* Calibrate on the flat.
* Suit the left and right arm joints
to the stand marker. If you do
not suit the left and right arm
joints to the stand marker, the
calibration cannot be done properly.
* During the calibration, do not
disconnect the USB cable.
* During the calibration, the player
moves the arms automatically. Therefore,
place the player in wide area so
that the arms are not be disturbed
to move. |